Where to Use
Apply KILZ® CLEAR SEALING WAX over KILZ® CHALK STYLE PAINT to seal the surface afterward. An “antique” look can be achieved by applying two contrasting colors, distressed with sandpaper, and sealed with KILZ® DARK SEALING WAX. Do not use on horizontal surfaces subject to foot traffic.
Application
-
The surface should be clean and completely dry, free of dust and debris.
-
Rub a thin layer of wax on with a clean, lint-free cloth or brush.
-
Allow to thoroughly dry.
-
Buff the surface for a subtle, velvety finish.
-
To maintain the quality of your finish, reapply wax as needed.
Clean-up & Disposal
-
Clean all tools and equipment with clean water.
-
For disposal of empty containers and unused product, contact your household refuse collection service.
-
To reduce waste, consult with your retailer or an online paint calculator to determine the correct amount of paint to purchase.
†Warning!
This product contains chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm – www.P65Warnings.ca.gov
DANGER FLAMMABLE VAPOR. COMBUSTIBLE MIXTURE. HARMFUL OR FATAL IF SWALLOWED. CONTAINS NAPTHA.
May be fatal if swallowed and enters airways. Skin and eye irritant. Avoid skin and eye contact and breathing vapors or mist. Do not expose to open flame. Wear protective gloves and eye protection.
First Aid: IF SWALLOWED: Do not induce vomiting. Call a physician immediately. IF INHALED: move to fresh air. IF IN EYES: rinse with water for 20 minutes.
CAUTION: KEEP OUT OF REACH OF CHILDREN – DO NOT TAKE INTERNALLY.
-
Int/Ext
Interior
-
Net Weight
2.4 OZ.(68g)
