Tag: Makeover
Trendy Two-Toned Kitchen Cabinet Refresh
September 4, 2018Once the space is cleared, remove the cabinet drawers and doors for sanding. Applying a coat of KILZ® 2 Latex primer achieves two important goals: it blocks out stains and provides the ideal surface for new paint colors to adhere to the wooden drawers. Perform the same prep steps on kitchen walls.
When painting cabinetry, choose a strong, semi-gloss latex paint that holds up to the rigors of daily use in a high traffic area. Since we’re going for a lively, two-toned look, we’ve chosen KILZ® TRIBUTE® in a periwinkle blue called Old Lamppost and contrasted it with KILZ® TRIBUTE® in Contemporary White.
Add some additional color punch with wild, graphic patterns on curtains or linens and suddenly your kitchen is a fun, inviting space perfect for entertaining. New knobs and pulls breathe new life into the cabinets once they’re replaced, and a simple pair of curtains cleverly camouflages the laundry appliances. An inexpensive set of new accessories tops off our slick new kitchen look, and the finished product is now cozy, clean and welcoming.
Old Lamppost
Contemporary White
RELATED ARTICLES
get inspired:
FOLLOw us:
@kilzbrand
SHOP
PRODUCTS
Table & Chairs Makeover
January 12, 2017Project Checklist:
- KILZ COMPLETE COAT® Paint and Primer in One
- 100-150 Grit Sandpaper
- Painter’s Tape
- Paint Brush
- Measuring Tape
- Chairs
- Table
- 3/8”-1/2” Synthetic Roller
Step 1:
For best results start with a properly prepared and previously painted or primed surfaces. Remove any loose or peeling paint and wash off dirt or grease with a non-soapy detergent or a TSP substitute. Rinse well and allow surface to dry.
Pro-tip: For glossy surfaces, scuff sand with the appropriate sandpaper prior to coating.
Step 2:
Tape off areas to be painted. To achieve a geometric pattern we recommend using measuring tape to evenly space tape.
Step 3:
Stir paint before and during application to make sure it is mixed.
Step 4:
Remove the painters tape when the paint is wet, or have a razor to cut the film if you’ve let the paint dry.
Step 5:
Allow to dry. The product dries to touch in 2 hours (at 77° F and 50% relative humidity) or longer in cooler temperatures and/or higher humidity.
Pro-tip: Measure peak to peak, as well as the distance between the points along the side of the table.
Pro-tip: Use a high quality synthetic brush or 3/8”-1/2” synthetic roller for the application. When painting a horizontal surface, like a tabletop, apply thin coats.
RELATED ARTICLES
get inspired:
FOLLOw us:
@kilzbrand
SHOP
join the conversation:
SHARE this post: